Modeling & Simulation and Test & Evaluationfor Aerospace and Defense Modeling & Simulation Modeling and Simulation is critical for many occupations. It allows experimentation without high risks, excessive costs, time constraints, and ambient interferences. Our modeling and simulation courses focus on practical application in the aerospace and defense industries. Certificate Program Choose 4 of the following to complete the certificate or take just 1 course: Fundamentals of Modeling and SimulationDeveloping SimulationsSimulation Verification, Validation, and AccreditationSystems Analysis, Modeling, and SimulationMonte Carlo Simulation Register Today! Test & Evaluation Designed to address the principles of Test and Evaluation (T&E), this program introduces all aspects of T&E throughout the life cycle of a system. Learn the roles, purposes, functions, and techniques of T&E within the systems engineering process. Certificate Program Complete the 5 course certificate or take just 1 course: Core Courses:Test and Evaluation PrinciplesRequirements DevelopmentTest Planning and ConductTest Evaluation and AssessmentElective Courses -- Choose one:System Validation and VerificationProject Scope, Cost, and Schedule Management Register Today! Learn from subject-matter experts! Meet Your Instructors: Mikel Petty, Ph.D. is a Senior Scientist for Modeling and Simulation at the UAH Information Technology and Systems Center. Dr. Petty has worked in modeling and simulation research and development since 1990 in areas that include simulation interoperability and composability, verification and validation methods, and Monte Carlo simulation. He is currently Editor-in-Chief of the journal SIMULATION. Dr. Petty is also an author of the CMSP Certification Exam. He teaches Intro to R Programming, Fundamentals of Modeling and Simulation, Simulation Verification, Validation, and Accreditation, and Monte Carlo Simulation for UAH PD Solutions. Jeffery K. Little, Ph.D. is subject-matter expert for Jacobs in modeling, simulation and analysis of integrated systems failure modes. Previously, he served as Principal Research Engineer for UAH's Center for Modeling, Simulation and Analysis where his work supported NASA's launch platform development. His diverse career includes managing turbine engine research at NASA, test operations support for the Air Force, teaching at the USAF Academy and Air Force Institute of Technology, and serving as President of the Community College of the Air Force. He teaches Systems Analysis, Modeling, and Simulation, for UAH PD Solutions. David Gross, Ph.D. is an Assistant Professor in Systems Engineering and leads the Architecture Driven Systems lab at the University of Arizona. He has over 30 years' experience specifying, designing, building, and delivering integrated systems, embedded software, and simulations for aerospace and software intensive systems. He was selected by Boeing and Lockheed Martin as both a Software and Systems Technical Fellow. His research has led to over 50 publications, 3 patents, and many proprietary innovations. He has also served on the Modeling & Simulation Professional Certification Commission. He teaches Developing Simulations for UAH PD Solutions. Gregory Tackett is the Vice President for Huntsville Operations of Clear Creek Applied Technologies Inc (CCAT) and is the former Senior Executive Service (SES) Director of the Ballistic Missile Defense System (BMDS) Operational Test Agency (OTA). Mr. Tackett has over 35 years of M&S experience, and has served in Director and Executive Advisor roles throughout his career. Mr. Tackett has a BS in Physics from Mississippi College and an MBA from the University of Tennessee Knoxville. He teaches Test Evaluation and Assessment, Test and Evaluation Principles, and Systems Engineering Overview for UAH PD Solutions. Steven E. Mullins has more than 38 years experience in the areas of analysis, assessment, and testing of strategic and tactical defense system hardware. This includes test design, planning, preparation, conduct and post test data analysis for laboratory and field and flight mission testing. He has participated in the development of unique and specialty test facilities with a wide range of test approaches and techniques from bench testing to MDAP programs. He teaches Test Planning and Conduct for UAH PD Solutions. Glenn McPherson is the Product Assurance Division Chief at Joint Attack Munition Systems (JAMS) Project Office, PEO Missiles and Space. He has worked in systems engineering and test and evaluation for more than 25 years. Mr. McPherson has held management positions in commercial and government engineering capacities. His experience includes employment in the automotive industry, aerospace and defense systems. He is certified in systems engineering, program management, test and evaluation, production and quality management and engineering, and logistics. Mr. McPherson holds bachelor's and master's degrees. He teaches Requirements Development for UAH PD Solutions. chat Live > > Download and Share Interested in a Cybersecurity, IT,Engineering, Management, or Leadership Program? View our 2018/19 Catalog. "Dr. Petty is second to none. I completely enjoyed his teaching method and presentation of the material." "Mr. Tackett is a very effective and interesting instructor." "Professor Petty did an excellent job of explaining the basics of modeling and simulation, including examples and applications." "This is a good way to make verification of requirements of a very complex system." "I have been looking for a good VV&A course for a few years for myself and my colleagues and am happy to have found this one. The course is relevant and valuable and I intend to encourage my colleagues to take it." "This course is directly related to my current job as a Test Requirements engineer. I can now work in a more formal test environment." Questions? Call 256.824.4430 chat Live Need to Train Your Team? Located in the heart of Research Park, UAH benefits from the wealth of engineering expertise that surrounds it. Our instructors are respected subject-matter experts who provide the latest knowledge and real-world examples. Professional Development Solutions can customize a program to meet your specific organizational goals. Select the topics, location, and times that are convenient for you or your team, and we will bring the transformative learning experience to you.